TRAK TC820si TURNING CENTER WITH SIEMENS SINUMERIC ONE CNC CONTROL HARDENED BOX WAYS 12 STATION BOLT ON TURRET, COOLANT THROUGH TURRET, 15.75" SWING, 20" MAX. TURNING LENGTH, 3" SPINDLE BORE
- Small footprint and generous 8.66″ maximum turned diameter and 20″ maximum turned length.
- Heavy Machine Tool Construction provides mass for rigidity and heavy cuts.
- Solid Casting for vibration absorption and rigidity.
- Precision Ground Ballscrews
- Guarding on All Axes to protect the castings, ballscrews and drivetrain systems.
- 7.88″ Hydraulic 3 Jaw Chuck for A2-6 spindle nose
- 787 IPM Feedrate on Z-Axis and 590 IPM Feedrate on X-Axis with aggressive acceleration and jerk control for ultra-fast positioning and reduced cycle times.
- Absolute Position Encoders to eliminate homing and enhance precision.
- Fine Chip Strainer has a metal screen with 1.7 mm openings to prevent large chips from clogging the coolant pumps.
- Large Single Front Door with large viewing window for easy access and integration with automation.
Capacity | |
|---|---|
| Height of Centers | 41.3″ |
| Maximum Swing | 15.75″ |
| Swing over carriage cover | 11.81″ |
| Maximum Turned Length (varies with workholding) | 20″ |
| Maximum turned diameter | 8.66″ |
| Tool Section Max | 0.75″ |
| Rapid Speeds | 787 IPM on Z Axis 590 IPM on X Axis |
| X-axis travel | 6.90″ |
| Z-axis travel | 20.8″ |
Headstock | |
| Spindle nose front | A2-6 |
| Chuck diameter | 7.88″ |
| Drawtube thread | M74 x 2.0 x 35 mm |
| Bar capacity | 2.56″ |
| Spindle bore | 3″ |
| Spindle front bearing diameter (ID) | 4.33″ |
| Number of bearings | 4 |
| Drive system | Belt drive |
| Spindle Speed Range RPM | 10-4,000 |
| Quill Travel | 4.13″ |
| Quill Diameter | 2.36″ |
| Quill Taper Hole | MT4 |
Spindle | |
| Motor peak horsepower (480V) | 38 |
| Motor continuous horsepower (480V) | 14.75 |
| Maximum torque | 100 ft-lbf @ 2,000 RPM |
Turret | |
| Number of tools | 12 stations (bolt-on) |
| Turning tool shank dimensions | 0.75″ x 0.75″ |
| Maximum boring bar diameter | 1.5″ |
Power Requirements - Machine | |
| Voltage | 480V (208V with transformer option) |
| Amps Full Load Current | 33A @ 480V 75A @ 208V |
| Phase/Hz | 3/60 |
Dimensions | |
| Net (L x W x H), lbs. | 117″ x 80″ x 65″ 8,000 lbs |
| Shipping (L x W x H), lbs. | 120″ x 90″ x 87″ 8,500 lbs |
TRAK TC820si TURNING CENTER WITH SIEMENS SINUMERIC ONE CNC CONTROL HARDENED BOX WAYS 12 STATION BOLT ON TURRET, COOLANT THROUGH TURRET, 15.75" SWING, 20" MAX. TURNING LENGTH, 3" SPINDLE BORE
- Brand: SOUTHWESTERN INDUSTRIES
- Product Code: TRAK TC820si
- Availability: In Stock
-
$0.00
- Ex Tax: $0.00
Tags: TRAK TC820si TURNING CENTER WITH SIEMENS SINUMERIC ONE CNC CONTROL HARDENED BOX WAYS 12 STATION BOLT ON TURRET, COOLANT THROUGH TURRET, 15.75" SWING, 20" MAX. TURNING LENGTH, 3" SPINDLE BORE