TRAK MACHINE TOOLS MODEL VMC2  COMPACT VERTICAL MACHINING CENTER

• Compact 52″ x 30.5″ Footprint - Fits Anywhere You Need
• Conversational Programming - Easy Setup of Simple Jobs
• G-Code Compatible - for Complex 3D Programs
• Bridge Construction for Rigidity and Precision
• Generous XYZ Travels - 14″ x 12″ x 17″

• Table size	18″ x 15″
  T-slots (number x width x pitch)	4 x 0.629″ x 2.480″ (4 x 16 mm x 63 mm)
  Travel (X, Y, Z axis) with soft limits	14″ x 12″ x 17″
  Rapid traverse X, Y, Z	400 IPM in Toolroom Ops 600 IPM in Production Ops
  Spindle taper	30 Taper
  Spindle speed range - Production Ops	50 - 10,000 RPM
  Spindle speed range - Toolroom Ops	50 - 5,000 RPM
  Spindle nose diameter	2.2″
  Tool clamping force (90 psi)	850 - 1,000 lbs
  Tool holder type	BT 30
  ATC tool capacity	8
  Maximum tool weight (incl. holder)	8 lbs
  Maximum tool diameter	2″
  Tool carrier speed	1.2 - 1.4 sec from front to back
  Tool selection system	Shortest path
  Spindle motor HP - peak	4.5 HP
  Spindle motor HP - continuous	3 HP
  Power requirements	208V (208-240V is acceptable), 3P, 30A 480V with transformer options (440-520V is acceptable), 3P, 15A
  Maximum weight of workpiece	500 lbs
  Height of table from bottom of bed***	34″
  Min. spindle nose to table distance ****	2.75″
  Max. spindle nose to table distance ****	20.25″
  Spindle center to spindle head casting face	15.7″
  Min. machine height ***	93″
  Min. machine height to fit through doorway **	93″
  Max. machine height (head all the way up) ***	101.5″
  Length (pendant enclosure rotated at 90°)	88.25″
  Overall length of machine with electrical cabinet fully open 180° and pendant enclosure rotated 90°	113.5″
  Footprint of machine (width x length)	30.5″ x 52″
  Weight net / shipping (lbs)	2,825 / 3,175
  Coolant capacity	15 gal
  Coolant pump power	1/4 HP
  Air - CFM (at 90 psi), SCFM	2.5 CFM, 18 SCFM
  Air quality	Air dried/water separator upstream of VMC
  Lubrication pump capacity	2 liter