HAAS CL-1 CNC CHUCKER NEW UNUSED SURPLUS 2017

AML Stock #002871

The innovative CL-1 is an ultra-compact CNC chucker lathe that comes standard with an 8-station automatic turret, making it ideal for dedicated small-part production, second-op parts, or short runs and prototyping small parts, such as those found in the communications, aerospace, medical, and dental industries. The CL-1 can be moved easily with a pallet jack or equipment dolly, and is small enough to fit into most freight elevators.

• Ultra-compact chucker lathe
• Operates on single- or three-phase power
• Can be moved easily with a pallet jack
• Easy access to tank and pump for cleaning out chips

• Specifications: 
  Swing over cross slide ….….….…..… 11”
  Swing over table ……….….…...……. 4.95”
  Chuck size ……….….….…………….. 4”
  Max. Cutting diameter ……..….…... 4.95”
  Bar capacity …………………….….… 1.0”
  Spindle nose …………………….….… 5c Collet Type
  Nose thread …………………………... 2-3/16"-10
  Max. speed ……………….…….….…. 6000 RPM
  Approximate machine weight …….. 1,950 Lbs
  Equipped With: 
  Haas Control
  5C Collet Closer
  Samchully FTC-110 4" Manual 3-Jaw Chuck
  Eight Position Indexable Turret
  Coolant System
  5 Horse Power Spindle Motor
  Operates with Single Phase or Three phase Power 
  Replacement Cost Today as Configured approx.$47,690 

• Swing Diameter	S.A.E	METRIC
  Over Cross Slide	11.0 in	279 mm
  Over Table	4.95 in	126 mm

  Capacities	S.A.E	METRIC
  Chuck Size (max)	4.0 in	102 mm
  Max Cutting Diameter	4.95 in	126 mm
  Bar Capacity	1.00 in	25 mm

  Travels	S.A.E	METRIC
  X Axis	12.00 in	305 mm
  Z Axis	8.00 in	203 mm

  Feedrates	S.A.E	METRIC
  Max Cutting	500 ipm	12.7 m/min
  Rapids on X	757 ipm	19.2 m/min
  Rapids on Z	757 ipm	19.2 m/min

  Axis Motors	S.A.E	METRIC
  Max Thrust X	1149 lbf	5111 N
  Max Thrust Z	1149 lbf	5111 N

  Spindle	S.A.E	METRIC
  Spindle Nose	5C (collet) Type Nose	5C (collet) Type Nose
  Nose Thread	2 3/16 in - 10	2 3/16 in - 10
  Drive System	Direct Speed, Belt Drive	Direct Speed, Belt Drive
  Max Rating	5.0 hp	3.7 kW
  Max Speed	6000 rpm	6000 rpm
  Spindle Bore ø	1.25 in	31.8 mm

  Main Spindle C Axis	S.A.E	METRIC
  Max Speed	160 rpm	160 rpm
  Max Rating	5.0 hp	3.7 kW
  Positioning (±)	0.01 °	0.01 °
  Holding Torque	3.00 ft-lbf	4.1 Nm
  Control Type	Interpolated Motion and Positioning	Interpolated Motion and Positioning

  Tooling	S.A.E	METRIC
  Tooling	Gang Style-Any Combination	Gang Style-Any Combination

  General	S.A.E	METRIC
  Coolant Capacity	13 gal	49 L

  Air Requirements	S.A.E	METRIC
  Air Required	1 scfm @ 70 psi	28 L/min @ 4.8 bar
  Inline Air Hose	3/8 in	3/8 in
  Coupler (Air)	3/8 in	3/8 in
  Air Pressure Min	70 psi	4.8 bar

  Electrical Specification	S.A.E	METRIC
  Spindle Speed	6000 rpm	6000 rpm
  Drive System	Direct Speed, Belt Drive	Direct Speed, Belt Drive
  Spindle Power	5.0 hp	3.7 kW
  Input AC Voltage (1 Phase)	220 VAC	220 VAC
  Full Load Amps (1 Phase)	16 A	16 A
  Input AC Voltage (3 Phase) - Low	220 VAC	220 VAC
  Full Load Amps (3 Phase) - Low	12 A	12 A

  Dimensions - Shipping	S.A.E	METRIC
  Domestic Pallet	78.0 in x 62.0 in x 80.0 in	199 cm x 157 cm x 204 cm
  Export Pallet	78.0 in x 62.0 in x 80.0 in	199 cm x 157 cm x 204 cm
  Weight	1940 lb	917.0 kg
  Domestic Pallet w/1 m Bar Feeder	99 in x 54 in x 82 in	252 cm x 137 cm x 208 cm
  Export Pallet w/1 m Bar Feeder	99 in x 54 in x 82 in	252 cm x 137 cm x 208 cm
  Weight w/1 m Bar Feeder	2060 lb	935 kg
  Domestic Pallet w/6' Bar Feeder	120 in x 54 in x 82 in	305 cm x 137 cm x 208 cm
  Export Pallet w/6' Bar Feeder	120 in x 54 in x 82 in	305 cm x 137 cm x 208 cm
  Weight w/6' Bar Feeder	2240 lb	1017 kg