GANESH GMV-2F VERTICAL MILLING MACHINE WITH 9" x 50" TABLE 3 HP VARIABLE SPEED

STANDARD GMV-2F MACHINE SPECIFICATIONS

TABLE –

Table Size: W x L 9” X 50” (230 X 1270 mm)

T-slot Width / Quantity 5/8” / 3 on 2.5” centers

Table Load Capacity 440 pounds (200 kg)

Table Load Capacity (Evenly Distributed) 900 pounds (408 kg)

Table Surface to Floor Dimension 32” – 48” (820 -1226 mm)

MACHINE TRAVELS & CAPACITY –

Table Travel – Longitudinal – X Axis 38” (966 mm)

Table Travel with Power Feed 33.07” (840 mm)

Cross Travel – Y Axis 12” (305 mm)

Vertical Knee Travel – Z Axis 16” (406 mm)

Overarm (ram) Travel 12” (305 mm)

Overarm Swivel 360°

Spindle Nose-to-Table Surface 0” – 18.5” (0 – 469 mm)

Spindle Centerline to Column Face 6.75” – 18.75” (171 – 476 mm)

Leadscrews with ground pitch surface (X & Y) 0. 200” per rev. (ballscrews optional)

Adjustable scale ring display resolution 0.001” (5 mm)

Ways – X, Y, & Z Axes – Hard Chrome Plated Hardened & Ground Dovetail Ways

SPINDLE HEAD – Vari-Speed

Spindle Motor 3-HP, 3-Phase 220 vac

Spindle Taper (hardened & ground) R-8

Spindle Runout 0.00008” maximum runout (0.002 mm)

Spindle Bearings ABEC-7 matched set Class-7 bearings

Variable Speed Spindle 60 – 4,500 RPM

Head Tilt (Left-to-Right) 90° – 0 – 90°

Head Tilt (Front-to-Back / Up-Down) +45°– 0 – -38°

Head Swivel on Turret 360°

Quill –

Quill Diameter 3-3/8” (85.725 mm)

Quill Travel – Manual & Power Feed 5” (127 mm)

Quill Feeds – With Trip Release - Inch 0.0015”, 0.003”, 0.006”

Quill Feeds – With Trip Release - Metric 0.04 mm, 0.08 mm, 0.16 mm

DIMENSIONS & WEIGHT –

Machine Weight 2,222 lbs. (1010 Kgs)

Electrical Requirements - 220 vac, 3-Ph., 60 Hz., 9.5 amps

Machine Layout Width –58” Depth – 63” – 75” Height -79”

Note: Machine is wired standard at 220V 3 phase. For 440V, machine needs to be ordered from Factory wired at 440 V. Otherwise, transformer is required.