SHARP RD 1600 RADIAL ARM DRILL, 63" Arm x 17" Column, with Box Table; 7 1/2" HP Main Motor, Coolant; 40 - 1920 RPM's; 5 Morse Taper Spindle, Power Clamping

FEATURES:

· Hardened and Ground Arm slide ways, gears

· Arm Elevation is controlled by a Hydraulic Motor

· Safety Device prevents the arm from dropping even when the copper nut is worn

· Counter-balanced spindles (with casting) increase durability

· Spindle depth setting with automatic kick-out

· T-Slots and Drain Channels on the table and base casting

· Auto-reverse tapping function

STANDARD EQUIPMENT:

· Box Table

· Coolant System

· Work light.

· Toolbox

· Wired 220V or 440V. Please Specify.

SPECIFICATION:

Diameter of column 17"

Distance from column surface to spindle center, max. 63"

Distance from column surface to spindle center, min. 13-3/8"

Travel of the spindle head 49-5/8"

Distance from base surface to spindle end, max. 63"

Distance from base surface to spindle end, min. 13"

Elevating the height of the arm 35-7/16"

Effective area of the table 27-5/8"x19-5/8"x15-3/4"

Dimensions of the base 97-5/8"x41-11/32"x8-1/4"

Taper hole in the spindle #5 MT

Stroke of the spindle 14-9/16"

R.P.M. of spindle (rpm range x steps) 40-1920 x 12 Steps

Feed of spindle (1PR x steps) 0.003"-0.038" x 6 Steps

Main motor (HP) 7 ½ HP

Elevating motor (HP) 2 HP

Clamping motor for column and gearbox (HP) 1 HP

Clamping motor for arm (HP) ½ HP

Coolant pump (HP) 1/8 HP

Machine height from floor, max. 124-56/64"

Measurement (LxWxH) / floor space 103"x45"x105"

Measurement (LxWxH) / shipping dimensions 110”x57”x115”

Shipping weight 10,340 Lbs.

Cast Iron

Drilling 2-5/8"

Capacity Tapping 2-3/8"

Boring 7-3/8"

Steel

Drilling 2-1/4"

Capacity Tapping 2"

Boring 5"

Total Power Consumption

¨ 220V 12KVA/35 amps

¨ 440V 12KVA/17.5 amps