TRAK MACHINE TOOLS MODEL TRL3075RX TOOLROOM LATHE 30" SWING x 74.80"cc with 6.69" THROUGH HOLE 30 HP WITH HANDWHEELS MANUAL OR CNC OPERATION - NEW

• 30″ swing, 74.80″ between centers
• Generous 6.69″ spindle through hole
• 30 HP continuous spindle motor
• High (aluminum) and low (steel) speed range settings

• Standard Features:

  • ProtoTRAK RLX CNC integrated into the machine at the factory
  • Chip Conveyor
  • Manual or CNC operation
  • Electronic handwheels and jogstick
  • Brushless servo motors
  • Inverter-duty spindle drive
  • Programmable spindle speeds
  • Constant Surface Speed (CSS) Programming
  • Inch Per Revolution (IPR) Programming
  • Optional TRAKing® for manual control of CNC programs
  • Optional turret for automatic tool changes

  • Capacity              

    Height of Centers 15”

    Distance Between Centers 74.80”

    Swing Over Bed 30”

    Swing Over Saddle Wings 28”

    Swing Over Cross Slide 19”

    Cross Slide Travel 16.1”

    Tool Section Max 1.5”

    Coolant Reservoir Capacity 47 gal

    Oil Pump - Way Lubrication 2.3L

    Head Stock Lubrication 6 gal

    Rapid Speed 400 IPM on Z axis 200 IPM in X axis

    Bed

    Width of Bed 18”

    Height of Bed 15.75”

    Headstock

    Spindle Nose A2-11

    Spindle Through Hole 6.69”

    Spindle Taper Non-MT Taper

    Taper in Reduction Sleeve MT#6

    Spindle Dia at Front Bearing 8.66”

    Number of Bearings 2

    Number of Speeds 2

    Spindle Speed Range 30-300 100-1000

    Spindle ID Thread (end of spindle) M185 x 3.0

    Tailstock

    Quill Travel 8”

    Quill Diameter 4.875”

    Quill Taper Hole MT#6

    Spindle Motor

    Horsepower 30 HP

    Power Requirements – Machine

    Voltage 408V +/- 10% (432V to 528V)

    Amps Full Load Current 71.6A

    Phase/Hz 3/60

    Dimensions

    Net (L x W x H), lbs. 170” X 82” 77” 15430 lbs.

    Shipping (L x W x H), lbs. 225″ x 89″ x 88″ 16,530 lbs.

    Other

    Coolant Pump Motor HP* ¾ HP

    Spindle Motor Brake Dynamic

    Way Surface Hardness 480-560 HB

    Head Stock Lubrication Oil Bath

    Options

    Tooling Kit 1 ¼”

    Chuck 20” A2-11

    Turret Option 1” 8 Position