AmericanMachinery.com

Visit us on eBay
  • SOUTHWESTERN INDUSTRIES TRAK 2 op VERTICAL MACHINING CENTER 2015 MINT CONDITION

SOUTHWESTERN INDUSTRIES TRAK 2 op VERTICAL MACHINING CENTER 2015 MINT CONDITION

MODEL TRAK-20P-M11-MILL

Just purchased from Prototype Lab and in mint condition

Overall Machine Dimensions • WxDxH - 30.5" x 52" x 101" ( H is with mill head all the way up, D includes door handle) • Min height to fit through doorway - 92" (Z cable carrier collapsed) Table Dimensions • Table size - 18" x 15" • Number of tee slots and pitch - 4 @ 63 mm • Tee slot width - 0.630" (16 mm) • Table maximum load - 500 lbs. • Ball Lock® hold down force - 2250 lbs @ 35 in/lbs of torque • Machine /Shipping weight - 2825 lbs/3175 lbs. Travel • X, Y, Z - 14" x 12" x 17" • Max distance from spindle nose table surface - 20.25" • Min distance from spindle nose table surface - 2.75" • Max swing clearance from spindle center to column - 14" • Max rapid speed X, Y & Z-axis, inches per minute - 600 Spindle • Tool holder type - BT30 • Spindle nose diameter - 2.2" (56 mm) • Max RPM - 6000 • Horsepower - 3 HP Automatic Tool Changer • Tool Capacity - 8 • Max tool diameter - 2" • Retention knob - BT30 Air Requirements • Pressure - 90 psi • Quality - Air dried/filtered water separator upstream of the machine • CFM - 2.5 at 90 psi • SCFM - 18

ProtoTRAK System Hardware • ProtoTRAK TMX CNC • Three-axis CNC and DRO • 5.7" active-matrix color LCD screen • 2 USB ports • LED status lights built into display • 512 MB USB Drive (Optional) • Uncluttered front panel with few hard keys • Beacon light • Override of program spindle speed • Coolant pump • Networking via Ethernet • Coolant tank 15 gal. 

Software Features – General Operation • Clear, uncluttered screen display • Prompted data inputs • English language – no codes • Soft keys - change within context • Windows® operating system • Three-axis CNC • Inch/mm selectable • Rigid Tapping • Reference to ball lock locations on table • Absolute home location • Canned cycles – pockets, profiles, bolt hole patterns, etc. • Indexer compatible

Call Marc @ (732) 390-0006 to inspect under power in NJ



The compact 

Write a review

Note: HTML is not translated!
    Bad           Good

SOUTHWESTERN INDUSTRIES TRAK 2 op VERTICAL MACHINING CENTER 2015 MINT CONDITION

  • $24,950.00

  • Ex Tax: $24,950.00

Tags: SOUTHWESTERN INDUSTRIES TRAK 2 op VERTICAL MACHINING CENTER 2015 MINT CONDITION

American Machinery Liquidators handles all types of used machine tools and machinery.