AmericanMachinery.com

Visit us on eBay
  • SHARP SV-2414A-F VERTICAL MACHINING CENTER MINI MILL WITH BOX WAYS FANUC CONTROL 4TH AXIS WIRED

SHARP SV-2414A-F VERTICAL MACHINING CENTER MINI MILL WITH BOX WAYS FANUC CONTROL 4TH AXIS WIRED

VERTICAL MACHINING CENTER - MODEL SV-2414A-F

  • 24” x 14” x 18” travel
  • Hardened and ground Box ways with TURCITE coating
  • 8,000 rpm, CAT 40 spindle
  • 16 tools carousel type ATC
  • Fanuc Oi-MF control panel with embedded Ethernet, RS232 port, USB port and Flash Drive port. (standard)
  • Pre-tensioned, double anchored, ball screws mounted on high precision angular contact bearings (ABEC 7), eliminate chatter and vibrations during heavy cutting.
  • Vertical head is equipped with 2 adjustable coolant nozzles, one adjustable air nozzle,  4 coolant openings and 4 air curtain openings under the spindle. There is also the air purge system that blows out chips at each tool change (standard)
  • Chip wash nozzles are installed at each side of machine base (standard)
  • Rigid taping, auto lube, thermal control system, coolant gun, air gun, interlock doors (standard)
  • Machine wt. 5,500 lbs

STANDARD ACCESSORIES

  • Fanuc Oi-MF control and drives with ; USB port, 512 K memory, Embedded Ethernet, RS-232C interface, 4 additional M codes, M30 Auto Power Off
  • Full metal enclosure with 2 large side doors
  • Coolant system with enlarged coolant tank
  • Coolant gun
  • Auto lubrication system
  • Rigid tapping
  • Air gun
  • Removable electronic hand wheel (MPG)
  • Door interlock
  • Chip pan
  • Air accumulator
  • Heat exchanger for electric cabinet
  • Florescent work light
  • 4th axis software from Fanuc
  • 4th axis kit prepped ( electrics, cables unit)
  • 4th axis with rotary table (complete with drives, motor)
  • Scrapper type chip conveyor
  • Hinge type chip conveyor
  • Oil skimmer
  • Coolant Through Spindle (CTS) prepped (rotary joint, hoses, cylinder electrics)
  • CTS 20 bar/70 bar (300/1,000 psi) pump with tank
  • Tool Probe (Renishaw TS27R)
  • Tool Setter (Renishaw OMP40)

Write a review

Note: HTML is not translated!
    Bad           Good

SHARP SV-2414A-F VERTICAL MACHINING CENTER MINI MILL WITH BOX WAYS FANUC CONTROL 4TH AXIS WIRED

  • Brand: SHARP
  • Product Code: SHARPSV2414AF
  • Availability: In Stock
  • $49,990.00

  • Ex Tax: $49,990.00

Tags: SHARP SV-2414A-F VERTICAL MACHINING CENTER MINI MILL WITH BOX WAYS FANUC CONTROL 4TH AXIS WIRED VERTICAL MACHINING CENTER MODEL SV-2414A-F, MINI MILL, HAAS MINI MILL

American Machinery Liquidators handles all types of used machine tools and machinery.