ACRA 1440C PRECISION GAP BED ENGINE LATHE CLAUSING COLCHESTER TYPE WITH TOOLING TAIWAN NEW

Specifications:

Capacity: 14”/20” x 40”
Swing over Bed: 14-1/8″
Distance Between Centers: 40″
Swing over Cross Slide: 8-5/8″
Swing over Gap: 20-7/8″
Width of Bed: 9”
Spindle Nose to Gap: 6-3/8”
Cross Slide Travel: 7″
Compound Travel: 4″
Compound Slide Travel: 4″
Spindle Nose: D1-4
Spindle Bore: 1.-5/8″
Spindle Taper: MT #5
Spindle speeds: (8) 80-2,000 RPM
Tail-stock Taper: MT #3
Tail-stock barrel travel: 4-1/2″
Tail-stock barrel diameter: 1-7/8″
Inch Threads: (45) 2 ~ 72 TPI
Metric Threads: (39) 0.2-14 mm
Modular Pitches: (18) 0.3 – 3.5 MP
Diametrical Pitches: (21) 8-44 DP
Longitudinal Feed Range: 0.002 to 0.067 IPR
Cross Feed Range: 0.001 to 0.034 IPR
Number of Feed selections: 17
Coolant Motor size: 1/8 HP
Spindle Motor size: 5 HP
Voltage: 230/460V, 3-PH, 60 cycle

Standard Equipment:

• Allen-Bradley® controls.
• Signature South Bend three V-way bed.
• 6″ 3-Jaw scroll chuck w/ D1-5 back plate
• 8″ 4-Jaw independent chuck D1-5
• 10″ Faceplate D1-4
• Safety Chuck Guard with microswitch shut-off
• Steady Rest with roller tips
• Two MT #3 Dead Centers
• Threading Dial Indicator
• Six Leveling Pads
• NTN Japanese Spindle Bearings
• 4-Way Tool Post
• Halogen lamp
• Complete Coolant system
• Micrometer Carriage stop
• Spindle Sleeve MT #5/MT #3
• Full Length Back Splash
• Foot Brake
• Front Removable pull-out Chip Tray
• Tool set and box
• Spindle Nose to Gap: 6-3/8″
• Follow rest
• Operation manual and parts list EXTRA LONG SADDLE W/ GIBS