AmericanMachinery.com

Visit us on eBay
  • JONES & SHIPMAN MODEL 1300 UNIVERSAL CYLINDRICAL GRINDER 10" x 27" cc WITH ID SPINDLE

JONES & SHIPMAN MODEL 1300 UNIVERSAL CYLINDRICAL GRINDER 10" x 27"cc WITH ID SPINDLE

Model: 1300  JONES & SHIPMAN  10" x 27"cc  Universal Cylindrical Grinder,  S/N: BO 92088  (New 1979)


Specifications:

Maximum diameter ground with new wheel
Maximum grinding length between centers
Maximum workpiece weight between centers
Table traverse fine feed graduations
Table traverse per revolution of handwheel
Table traverse steplessly variable per minute
Table swivel adjustment-included angle clockwise
                               -included angle counterclockwise
Cross traverse of wheelhead
Cross feed handwheel graduated in increments of
Feed inching lever graduated in increments of
Automatic infeed of wheelhead at each reversal of
     table
Infeed rate at table reversal, reduction in work
     diameter
Maximum range of continuous infeed for plunge
     grinding allows a reduction in work diameter
     of
(6) Workhead speeds
Workhead swivel, clockwise/counter-clockwise

Tailstock spindle center taper
Tailstock spindle center taper
Standard grinding wheel (EIU Type)

(2) Wheelhead speeds
Wheelhead swivel adjustment each side of normal
     position
Internal grinding spindle speed
Internal grinding capacity

 

10"
27"
220 Lbs.
0.0002"
.5"
3"-144"
16°
18°
8-1/16"
.0002"
.0001"
.0001"-.0006"

.0002"-.0012"

0.040"


40-320 R.P.M.
15 degrees clockwise, 
     90 degrees anti-clockwise
Jones & Shipman taper
#3 Morse
12" diameter x 1-1/2" wide x 5" 
     bore
2,000 & 2,650 R.P.M.
180 degrees

16,500 R.P.M.
3/4"-2" Diameter


Equipped With:
Manually operated or hydraulically actuated table traverse
Manually operated, Automatic Intermittent (at table reversal), and Automatic 
     Continuous (Plunge grinding) modes of wheelhead infeed
EIU type wheelhead with 180° swivel, left hand external grinding operation, and 
     swing-around internal grinding attachment with spindle
3/4 H.P. 3/60/220-440 volt motorized workhead mounted on a graduated swiveling base
     arranged for live and dead spindle operation
9" Diameter KANET permanent magnetic chuck for workhead
Tailstock with plain center
Self-contained hydraulic system with 1 H.P. motor
External coolant pump and tank
BIJUR manually operated one-shot lubrication system
5.5 H.P. 3/60/220-440 volt 1,720 R.P.M. wheelhead motor and electrical controls
Machine is wired for 220 volt operation.


Approximate Weight: 4,256 Lbs.

Approximate Dimensions (Machine Only): 97" L-R x 32" FB x 69" H

Location: F.O.B. Truck, Hauppauge - Long Island, NY


Write a review

Note: HTML is not translated!
    Bad           Good

JONES & SHIPMAN MODEL 1300 UNIVERSAL CYLINDRICAL GRINDER 10" x 27" cc WITH ID SPINDLE

  • $14,500.00

  • Ex Tax: $14,500.00

Tags: JONES & SHIPMAN MODEL 1300 UNIVERSAL CYLINDRICAL GRINDER 10" x 27"cc WITH ID SPINDLE, KARSTENS GRINDER, STUDER GRINDER, LANDIS GRINDER, HEALD GRINDER

American Machinery Liquidators handles all types of used machine tools and machinery.